Re: problems with certificate inspection

YBKruthi · 08-20-2023

Description This article describes workaround steps to follow if an issue appears with the SD-WAN interface that is not visible after upgrading to version 7.2.5/7.4.0. Scope FortiGate. Solution Run into cosmetic issue post upgrade to version 7.2.5/7....

YBKruthi · 08-30-2023

Hi @dgullett Check Logging Settings: Make sure that the logging settings for your policies are configured to include the Policy ID in the logs. To do this: Log in to your FortiGate firewall's web interface. Navigate to "Policy & Objects" > "IPv4 Poli...

YBKruthi · 08-30-2023

Hi @SebastianRozycki , As a troubleshooting action plan please check whether applied policy has the hit count. Further you can check the traffic log and ensure if the traffic is passed through intended firewall policy.

YBKruthi · 08-20-2023

Hi @hatanmaek I understand that you have 2 FortiGate-40F licensed devices each in SiteA and SiteB. Your query is based on if you can Form HA out of these 2 boxes. > Answer is Yes. You can deploy HA among 2 same model devices. > However, there are Con...

YBKruthi · 08-20-2023

Hi Ozorio, I understand that you have created the FortiGate VM and tried to reach internet by initiating ping to 8.8.8.8 Please check below steps to narrow down the issue: 1. You need to ensure you have default route created towards the Internet faci...

YBKruthi · 08-01-2023

Hi @Potato, I suspect that the connectivity is timing out and unable to fetch forward logs from FAZ. you can perform below action plans: 1) Ensure you have a stable network/internet connection. 2) You can increase the timeout as below. > config log f...

User Statistics

User Activity

Technical Tip: SD-WAN interface not visible after upgrade to 7.2.5 & 7.4.0

Re: Fortigate Forward Traffic Log not showing Policy ID Number (x)

Re: Youtube on Firewall Policy

Re: FortiGate question

Re: No Internet | Azure FortiGate VM

Re: Fortigate load logs from FAZ extremely slow.

Re: problems with certificate inspection

KCS