Description This article describes workaround steps to follow if an
issue appears with the SD-WAN interface that is not visible after
upgrading to version 7.2.5/7.4.0. Scope FortiGate. Solution Run into
cosmetic issue post upgrade to version 7.2.5/7....
Hi @dgullett Check Logging Settings: Make sure that the logging settings
for your policies are configured to include the Policy ID in the logs.
To do this: Log in to your FortiGate firewall's web interface. Navigate
to "Policy & Objects" > "IPv4 Poli...
Hi @SebastianRozycki , As a troubleshooting action plan please check
whether applied policy has the hit count. Further you can check the
traffic log and ensure if the traffic is passed through intended
firewall policy.
Hi @hatanmaek I understand that you have 2 FortiGate-40F licensed
devices each in SiteA and SiteB. Your query is based on if you can Form
HA out of these 2 boxes. > Answer is Yes. You can deploy HA among 2 same
model devices. > However, there are Con...
Hi Ozorio, I understand that you have created the FortiGate VM and tried
to reach internet by initiating ping to 8.8.8.8 Please check below steps
to narrow down the issue: 1. You need to ensure you have default route
created towards the Internet faci...
Hi @Potato, I suspect that the connectivity is timing out and unable to
fetch forward logs from FAZ. you can perform below action plans: 1)
Ensure you have a stable network/internet connection. 2) You can
increase the timeout as below. > config log f...