One of our remote offices has been having intermittent internet issues
(thanks Comcast). From what I have been able to find, by default
FortiGates don't do much health monitoring on WAN connections, and that
if I want WAN health monitoring I need to ...
I know you can manage FortiAP's for free, but I am finding conflicting
information on whether or not you can manage a Fortiswitch for free.
From what I can find you either have to pay for a license to manage a
Fortiswitch or you can manage 1 Fortiswi...
I am trying to use a FortiAP 221E without a FortiGate, but thus far have
been unable to get it work. This FortiAP was previously used with a
FortiGate and I can reconnect if needed to put in Standalone mode. I
attempted to Factory Reset the AP using ...
We are implementing a new cloud VoIP phone system and we are looking to
setup a QoS for this phone system. Essentially, we would like to setup
the QoS as follows. Highest Priority1. Cloud VoIP Provider2. Remote
Meeting Applications (Teams, Zoom, etc)...
In our internal LAN we have the DNS server set to be the same as the
Interface IP of that subnet. This DNS server is set in recursive mode
and exists only to translate some domain names to IP address for
internal uses. I would like to have this same ...
@distillednetwork Thanks for the information, this does seem like a good
first step before trying to go headfirst into SD-WAN.Do you have any
recommendations on what I should set the "Set Server" too? In some of
the Fortinet examples I have seen Goog...
Hi @distillednetwork Thank you for the quick and thorough response. The
remote office only has 1 internet connection, so no failover is
possible, and with that being the case I don't think I have to worry
about routes updating. Do you have any guides...
The switch is running FortiOS v6.6.4 build0454 I have tried several
times to upgrade and it never goes through. I have tried updating to
version v6.4.9 and the most current v7.4.8 and neither had worked.I am
running FortiCloud version v25.3_0320 The ...
After I gained access to the FortiAP GUI, I can confirm that it does not
have a standalone mode. I can confirm that I was able to create a free
FortiEdge Cloud account and register and manage the AP from the
FortiEdge Cloud account.
So long as each VLAN has a DNS record pointing the interface IP to the
FQDN it may work.Although I'm not sure how having multiple IPs point to
the same FQDN will work, you could still test it.
