Hi,I have a very strange problem with Forticlient when I use it from
MacOS (Sonoma). It was ok earlier (with Ventura) but because I tried to
debug some another strange IPSec VPN issue, I had to uninstall it (using
the official method) and install an ...
Hi,I'm trying to achieve the same with my FTG 40F on ipv6 which I can
easily can do with the Telekom provided CPE (some kind of low end belkin
router :)). So, if I connect directly to the Telekom router, I get a
private IPv4 address and a delagated I...
Thank you all. Seems like this is some kind of compatibility issues
between the latest (7.x) version of Forticlient and MacOS Sonoma. With
6.x it is working perfectly L:
Hi, Sure WAN config system interface edit "wan" set vdom "root" set mode
pppoe set allowaccess ftm set type physical set netflow-sampler both set
lldp-reception enable set monitor-bandwidth enable set role wan set
snmp-index 1 config ipv6 set ip6-all...
It is 7.4. I also had to decrease ipv6 mtu on the LAN side to have a
stable NAT66 connection config ipv6set ip6-address
fd33:f1ba:9f3c:4c31:d676:a0ff:fe7b:5c03/64set ip6-allowaccess ping https
ssh snmp http fgfm fabricset ip6-send-adv enableset ip6-m...
