Hello All members. I would like to ask you how to check current port
utilization on switch managed by Fortigate with ver 6.4.14.I found some
statistic on ver 7 but need on 6. It could be even from CLI.is this can
be visible from FG level or directly ...
Hi ALL I have question , and maybe someone from Fortinet can answer. I
have HA FG300E ( 2 devices) but we need to install more switches then
one unit can support. And the question is how Cluster manage total
supported devices. Is it still 72 or is 2x...
Hello All. I need to deploy Fortinet solution in small factory ( FG, FS
) and I have a question , How to connect exist ring to MCLAG cluster (
this red Ring ) - Can I mix Ring redundancy with MCLAG redundancy ? or
option 2 ofc in this ring will be mo...
Hello.I have a question. Is exist any equivalent for FortiGate and
fortiswitch like for cisco - default interface-type interface-number I
have a problem with one setup and I don't have any idea why links
between switches are down Those two red link a...
Hello again.Another topic I have to replace some switches to Forti
switches but will not be directly connected to FG . Already prepare some
test environment for this configuration and I'm stuck on the
"red"connection is:FG - FS1- HPE1- HPE2 - FS2Alre...
Hi I have issue with sync on HA. is permanently out-of-sync. I have a
backup from backup unit and I would like to restore HA using this config
file. Can I load this file via GUI. What should I change it. If the
config file is loaded to both units at ...
Hello All.I have a case in our network with MCLAG-ICL. Every time when I
plane Multi-tier architecture auto-isl-port-groups I always setup before
connecting switches. But what happen if I have already setwork when some
one connected many switches and...
Hi AllI don't want to open new topic. I need to find the way how to move
all configurations ( vlan policies ) from root vDOM to new Dedicated
vDOM.I already enabled vdoms and all connfig is now in root, I need to
create two new vdoms and config of vl...
from CLI is ok, In theory ports and vlans from different are shared via
Fortilink, but I think it is a FGT bug in 7.2.7 because I see switch in
vdom2 but I don't see ports in GUI. this is view from root VDOM and
ports 3 and 5 are exported to other VD...
HelloI know this is very very old topic but I have to create something
similar. The goal is to create infrastructure base on the FGT and many
FS with 2 or 3 vdoms and distribute vdoms across this network. On the
and I need assign part of the ports on...
