You are leaving our website

karnack · 05-30-2018

Hi Everyone, Indeed, I try to set up load balancing for syslog servers.The load balancing itself works well but the syslog server does not receive the addresses of the remote equipments, there is a NAT realized by the forti, so we do not know what eq...

karnack · 06-13-2018

" Preserve Ip client" it's only available for HTTP/HTTPS loadbalancing. Preserve Client IP Select to preserve the IP address of the client in the X-Forwarded-For HTTP header. This can be useful if you want log messages on the real servers to the clie...

karnack · 06-08-2018

up because no answer

karnack · 05-31-2018

The snat is realized by the forti whereas I have no rule of implementation for the network equipments. Forti presents the address of the interface of the incoming flow to my servers syslog that is why all my syslog servers only see the address of the...

karnack · 05-31-2018

My equipment is a forti 1500D, typically, my network equipment (10.10.20.x) sends syslog (UDP 514) to the configured syslog vip (10.10.10.1), the real syslog servers 10.10.10.2 and 10.10.10.3, receive well the network logs but NATtes with my interfac...

User Statistics

User Activity

Issue from loadbalancing server and source address

Re: Issue from loadbalancing server and source address

Re: Issue from loadbalancing server and source address

Re: Issue from loadbalancing server and source address

Re: Issue from loadbalancing server and source address