Description The article describes that the FortiSwitches go offline
after upgrading FortiGate when the LLDP settings are set to VDOM or
disabled in the FortiLink interface. The issue may be caused by a bug
detected in v7.6.1 or later. Scope FortiGate...
Description This article describes how to identify the default ports in
Fortiswitch that have auto discovery enabled. Ports with auto discovery
are used by FortiGate to discover and manage FortiSwitches. Scope
FortiSwitch. Solution To check the defau...
Description This article describes how to resolve the error message
'Login failure: the user has not been granted the requested login type
at this computer' in a Windows server machine using the
FortiAuthenticator agent. Scope FortiAuthenticator. Sol...
Description This article describes the when option to create a new user
is grayed out because to Maximum allowed license for users has been
reached. Scope FortiAuthenticator. Solution To check the license
information and User Inventory, go to System ...
Description This article describes recovering a lost REST API key for a
user. The FortiAuthenticator REST API key is used to authenticate and
authorize access to FortiAuthenticator REST API. This is required for
FortiAuthenticator Agent for Microsoft...
Hi @unknown1020, Please check the article below for troubleshooting
"Unable to connect to FortiGuard servers" error.
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Unable-to-connect-to-FortiGuard-servers/ta-p/226149
Can you share you...
Hi @barisben To get a report via FortiAnalyzer that includes source
user, source interface or VLAN, destination user, destination interface
or VLAN, and bandwidth information, you can follow these steps: 1. Go to
Reports > Report Definitions > Templa...
Hi @unknown1020 , Did you able to try to change the inspection mode of
firewall policy? If you're using flow mode inspection kindly change it
to proxy inspection mode using the below command. After the change
please clear browsing cache and test agai...
@kpatio You may refer to the below article to setup 2fa for your admin
login. I would suggest to have a backup administrator because you might
encounter issues on accessing the device if not configured to tested
properly.
https://community.fortinet.c...
Hi @quynhln8 , Based on the description, you see phase 1 is up but phase
2 is down on FortiGate? Did you try disabling PFS on FortiGate and flush
the tunnel?
