I have a FortiGate 80F, and I've attempted to configure WAN failover.
Configuration:internal1: ip/mask: 192.168.3.99/255.255.255.0 dhcp range:
192.168.3.110-210 DNS: 8.8.8.8,8.8.4.4 wan1: ip/mask (DHCP assigned):
192.168.1.21/255.255.255.0 dns/gatewa...
Using FortiGate 80F with Fortinet OS 7.4.0. I am configuring dual WAN. I
want my primary (WAN1) to be used whenever the health link is alive. My
secondary (WAN2) should only be used while WAN1 is down (dead). As soon
as WAN1 comes back alive, I want ...
Ahhh. That's what I was missing as my routing table was showing both as
the candidate default (they were still set to the default of 5). I've
set wan1 to 10 and wan2 to 20. Now it only shows wan1 in the routing
table (as the default) even though both...
Thanks, one other question... Do I need to configure static routes as
the documentation says:(As you can see wan1 has a priority of 1, and
wan2 has a priority of 2.) config router static edit 1 set device "wan1"
set dynamic-gateway enable next edit 2...
