Hi all, I hope you're well. I am having trouble renewing my Let's
Encrypt certificate with the ACME protocol. My FortiGate is currently
running 7.4.8 and I have gone through the requirements checklist for
ACME renewal and has local-in and other restr...
Hi all, I hope you can help me. I'm having an issue with our
FortiManager and a conflict which is preventing us from getting the
firewall to a synchronised state. Below is the ssl-ssh-profile and the
configuration which it is trying to push, the prob...
Hi all, I hope you're well. Hopefully you can help me, I have
security-fabric running across multiple FortiGate firewalls and I have
noticed that we receive no alerts from triggered automation stitches on
our downstream firewalls. At present, I have ...
Hi all, I hope you're well. I am having issues connecting our branch
firewalls to our fabric root FortiGate. All the configuration is correct
as prior to upgrading all firewalls to 7.4.7 this was working just fine.
Post upgrade to 7.4.7, we found tha...
Hi all, I hope you're well. I am migrating a site with existing Cisco
switches to FortiSwitch but will not be using the default FortiLink
interface since the VLAN's are already created under the existing
aggregate interface. Templates have been confi...
Hi AEK, Thanks for the response, the issue is now resolved but I will
definitely remember that command for next time. I don't believe this is
noted anywhere nor if it was a sheer coincidence however, on one of my
firewalls I removed the certificate f...
Hey @dingjerry_FTNT, I can confirm this has allowed this option to be
displayed and therefore installed via FortiManager however, I now have
an issue with config SSL: When checking in the CLI, in the config SSL
settings within the ssl-ssh-profile the...
Hi ap, Thanks for that. I was worried that it may have affected
something else and caused issues. If this only changes configuration
related to FortiAnalyzer, FortiSandbox and central management I will
give this option a try and see if this resolves ...
I've just tested this on my lab firewall running a similar setup with
version 7.2.10 and this command is available: However, this isn't the
case for my firewalls running 7.4.7 therefore, something must have
changed and it either needs to be enabled s...
