Hi,I am doing a lab setup where I have hit a problem with ebgp routes
disappearing from the routing-database when ibgp routes shows up. I have
not done any route manipulation on my BGP session at the moment. I would
have thought that even if the rout...
Hi Nagaraju, I got below information from the link you provided.
router.bgp:network0Objects with no hard limit, such as objects limited
by system memory. I am interested to know what is the max routes you
have seen for 60F and 40F in the field since ...
Shouldn't the AD for ebgp be the selecting criteria for routes? --> ah I
found that AD is only for same routes if received from different routing
protocol.
I think my version is too old so below command did not seem to work for
me. FTGT-SPOKE1 (bgp) # set default-local-preference 0I used a route-map
to increase the LP to 200 from the eBGP. Shouldn't the AD for ebgp be
the selecting criteria for routes? ...
Hi Suraj, Thank you for testing it out. I was suspecting of the local
preference in on of my messages but did not have the time to test it
out. I will find sometime to try it out hopefully today. BTW, what
version are you running on. I was on an olde...
Hi Yuri, Yeah I will have a further look at my configuration. I was also
hoping that the eBGP route would be installed as well. On the
advertising FTGT I have tried capability-default-originate to
redistribute static just to see if that matters as we...
