Troubleshooting Tip: How to process an issue when ...

bbae · 10-21-2024

Description This article describes an issue where rebooting a single unit in an FGSP cluster with two members with standalone-config-sync enabled will cause out-of-sync errors because both 'port_ha's cannot reach each other. Scope FortiGate v7.0, 7.2...

bbae · 02-29-2024

Description This article describes the scanning order for application control. Scope FortiGate v7.2 and above. Solution An Application control (IPS engine) on FortiGate inspects incoming traffic for signature-matching. The one scans the traffic for m...

bbae · 01-31-2024

Description This article describes what happens when executing the command 'diagnose sys ha reset-uptime' while configuring 'set link-failed-signal enable'. Scope FortiGate High Availability. Solution In this example, HA environment, FGVM16TM24000037...

bbae · 12-21-2023

Description This article describes how to process an issue when the FortiGate connector cannot get system logs on FortiGate. Scope FortiSOAR v7.4.x, Connector. Solution When using Fortinet Fortigate Connector, some operations such as 'Get System Even...

bbae · 12-12-2023

Description This article describes how to import a certificate on FortiGate as a Server certificate for deep inspection. Scope FortiGate v7.0 and above, certificate, Deep inspection. Solution Import the certificate on Fortigate using the Certificate ...

User Statistics

User Activity

Troubleshooting Tip: Rebooting a single device in an FGSP cluster causes an out-of-sync error

Technical Tip: Scanning order for application control

Troubleshooting Tip: What happens when executing the command 'diagnose sys ha reset-uptime' while configuring 'set link-failed-signal enable'

Troubleshooting Tip: How to process an issue when the FortiGate connector could not get system logs on FortiGate

Technical Tip: How to import a certificate on FortiGate as a Server certificate for deep inspection

Troubleshooting Tip: How to process an issue when ...

Technical Tip: How to use an escape character in R...

Troubleshooting Tip: What happens when executing t...

Technical Tip: For HA environment with enabled mgm...

Troubleshooting Tip: The error message 'Unable to ...

KCS