Could someone share his/her data on memory utilization on Fortigate 80E
with SSL inspection, AV, IPS enabled?Is it possible to list which IPS
signature is using the most resources?I'm using FortiOS 6.0.4 with two
80E in cluster (A/P). My memory usage...
Hey guys, i have to configure reverse proxy for internal email server. I
found all the documents how to do it but i have one problem i can't
figure out. It's probably something easy but i just can't find out where
the problem is. For testing purposes...
i created Application control profile for blocking Facebook and all it's
sub-apps. The question I have is, when i created this profile, under
first app listed i have warning sign with msg. "parameters required" I
have not idea what parameters I shoul...
Hi, I have Fortigate 100E with FortiOS 5.6.4 and I'm having a problem
with using security groups in LDAP. I configured LDAP on my FGT and test
went OK. If i create a policy with a single user than that policy works,
but if I add that user to a group ...
I have a problem which i can't figure out. I have
isp-router-fgt-l3sw-access switches. L3 sw will do routing for 4
subnets. Fgt has inside and outside interface. Inside int on fgt is
aggregated and has mngmt ip address. Uplink from l3 sw is configure...
I know that part, but since I never experienced this myself I was
wondering if inside interface becomes unresponsive for example. If yes,
maybe I could setup a SLA tracker to it. This is very difficult to test
in the lab since I can't make that much ...
That's what I thought, I already selected Windows OS and changed
severity to med, high, critical.i never experienced this myself, I only
know what client tells me. What should i monitor in order for slave unit
to take over when primary fails in this ...
You can swap between VDOMS in GUI (global>system>vdoms), select VDOM you
want to check, then open console on the right side and check the memory
status
Hey, I forgot to update this thread with new information. I made it work
after a while. Problem was with SSO configuration on the box itself.
When i tried to set it up initially I used to choose advanced mode and
that's where the problem was. When i ...
