Not too long ago, our cyber team asked us to implement geo-blocking
to/from certain countries, which we obliged. Unfortunately, one of our
locations can no longer reach a vendor portal they use because it's
hosted in Microsoft's cloud in one of these...
While we've been running FortiManager for years, we finally took the
time to setup it up to fully provision a firewall using Provisioning CLI
Templates. We built around 17 individual CLI Templates that configure
various sections of the config, and on...
Currently running FortiOS 7.2.11 and we're exposing a web server behind
a Virtual Server configured for SSL offloading. Our security team is
asking us to set the minimum protocol to TLS 1.2, but we've been asked
to make sure no legacy clients are sti...
We've been running FortiNAC for 2 years now and are starting to deploy
Intune joined workstations. I followed the 9.4.6 Intune integration
guide and it's successfully polling Intune and bringing in devices. The
issue we are now seeing is, we're a glo...
Does anyone have MS NLB configured with multicast working on Fortinet
gear in routed mode? We have an HA pair (active/passive) of 1801F
firewalls with a pair of 3032E switches attached via Fortilink. The
Microsoft services we are trying to configure ...
Using your suggestions, I believe I was able to piece together a working
solution using three policies. 1) FQDN for the initial page,2)
Geo-location object against the Azure Internet Service with a web filter
allowing the login URL while blocking all...
That was the very first thing we tried. Unfortunately, the vanity URL
immediately redirects to a b2clogin.com URL, which resolves to numerous
IP addresses depending on which DNS server is queried. Since I don't
have a logon to the portal itself, it's...
I want to thank you for directing me to this feature. While it doesn't
fully address our cyber teams concern, since it leaves Azure in this one
country open, it closes the door on several others they're concerned
about. I feel it's an acceptable comp...
How far off is your clock when it reboots? I came here today because I
have a 40F, out of dozens, that reverts to 01/01/2000 00:00:00 after it
boots from a power off state. This prevents NTP from working because the
drift too far off. I suspect I nee...
Hi Toshi, I did acknowledge the recommendation suggests two FortiLinks
verses one, but everyone's argument against it was specific to WAN links
over FortiLink managed switches, and to use standalone instead.
ChatGPT's entire argument revolved around ...
