Hi, I have a fortiswitch 224E managed by a Fortigate 100F.The switch is
used as internet facing switch.I need to rate limit some port as there
is more than one user using that internet service.So I need to rate
limit the port speed at 20mbs.I do not ...
I have the same needs as that
topicshttps://community.fortinet.com/t5/Support-Forum/Can-FortiAP-broadcast-2-different-SSIDs-from-different-VDOMS/m-p/74297#M74207I
need 2 VDOM one IT and one OT and both will need their separate SSID on
a single AP.The...
The problem is that the traffic do not reach the Fortigate for the
internet service because it does not passthrough it. The 2 other
internet users have their own firewall. The switch only split internet
service between 3 users. 1- my fortigate (60 Mb...
Just as FYI I used this information as
inspiration.https://community.fortinet.com/t5/FortiGate/Technical-Tip-Hardware-switch-Software-switch-VLAN-switch-Use/ta-p/210153
I know it's an old but I did something similar this WE see thread
here.https://community.fortinet.com/t5/Support-Forum/FortiAP-connected-to-2-VDOMs-with-2-SSID/m-p/285417#M225244
Just an update.I make it work this Weekend . I have 3 SSID in my AP that
is connected to a small TPlink switch.IT bridge no vlan, OT bridge to
VLAN 3 and Guest bridge to VLAN 99 Then in the Fortigate:IT VDOM (ROOT),
I used a software switch with Vlan...
