Hi, There are some applications which will not work with load balancing,
for example, let's take RDPRDP initiated with one public IP let's say
for the same session if packets are coming from different public IP
servers will reject the packet. The sam...
Hello The real source IP will be displayed if you are connecting to the
mail server from within the corporate network and have NAT turned off.
Please describe the situation in detail and the specifications you need.
Hi, Can you confirm whether have you enabled netflow on the interface
level? Kindly go through the document below:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-Configure-Netflow/ta-p/196080?externalID=FD36460
Hi, When HA-direct is enabled, FortiGate uses the HA management
interface to send log messages to FortiAnalyzer and remote syslog
servers, sending SNMP traps, access to remote authentication servers
(for example, RADIUS, LDAP), and connecting to Fort...
Hi andribenjul, Make sure the DNS record resolves into the correct IP
address and that the IP address is reachable from the client. Please
take debug using below commands and share it here for checking: diag
debug resetdiagnose vpn ssl debug-filter s...