Hi all, i'm running 5.2.4 on 60d poe with software sw on the unit, i
have tested the following scenarios :1. NAT on vdom link - not working2.
NAT using 2 hardware interfaces (Internal3 and Internal4)dedicated to
hardware vdom link - not working the s...
Hi All, i'm running a PoC and got some serious issues with advanced
configuration which runs on version 4 MR2 Patch15 that includes : 1.
vdoms with inter-vdom-link that utzilizing NAT accross that vdom link
for some of the traffic with mtu manipulati...
Hi All, i'm running a PoC and got some serious issues with advanced
configuration which runs on version 4 MR2 Patch15that includes :1. vdoms
with inter-vdom-link that utzilizing NAT accross that vdom link for some
of the traffic with mtu manipulation...
Hi all, After upgrading to 5.2.4 , all some SSL traffic is not passing
through and management traffic using SSH/HTTPS to the firewall is not
working, there are no proxy configuration nor SSL inspections or any
mgmt hardening. Has anyone seen this kin...
hi all, what is the best way to convert configuration from a fortigate
machine to a newer model, got 800 and i' m trying to upgrade it 600C,
the confiuration fails on the 600C after modifying the
interfaces,routing table and policies
Hi emnoc, the packets are not dropped - forwarded without nat,what
limitation of vdom link in regards to GRE is there - i have this exact
configuration working beautifully on version 4 build 356 :)
well, it seems like the firewall is blocking traffic to itself for some
reason : (no trusted hosts and ssh is allowed on the interface) id=20085
trace_id=2 func=init_ip_session_common line=4527 msg="allocate a new
session-0000038f" id=20085 trace_id=...
