Description This article is a sample configuration of IPsec VPN
authenticating a remote Palo Alto peer with a pre-shared key. Topology:
Scope FortiGate, Palo Alto. Solution Go to: VPN -> IPSec Tunnels, select
'Create New '-> IPSec Tunnel. Note: The w...
Description This article describes two workarounds where the DHCP client
can get an IP address from the DHCP server (upstream device) when the
FortiGate is in policy-based mode, and a virtual-wire pair interface is
being used to aggregate interfaces ...
Description This article describes a workaround where the DHCP client
can get an IP address from the DHCP server (upstream device) when the
FortiGate is in policy-based mode, and a software switch is being used
to aggregate interfaces to interconnect...
Description This article describes how to configure the VRRP IP address
as the local VPN gateway address. The IP address of a VPN gateway is
usually the IP address of the network interface that connects to the
Internet, but it can also be changed.The...