Re: I cannot see the automation category in the se...

nmarche1 · 04-15-2024

Hello everyone,The problem has been going on for months (or possibly years?) since i have been the Network Admin at my company.The core of the problem is that some (not always the same) users are experiencing random wifi/lan disconnects and are force...

nmarche1 · 05-10-2023

Hello everyone, We have started enrolling into PING ID authentication in my company and we are having trouble setting up the MFA wait time on the Fortigate VPN (The time it sits on 45%). Is there any way to set the time for third party authenticators...

nmarche1 · 02-27-2023

As the title says, I don't see the automation category in the security fabric drop down menu. Our Forti gate version is 7.0.9. Is there a CLI command to enable it or a button somewhere that I couldn't find?

nmarche1 · 04-16-2024

Thank you for all the answers, I will try and make the changes you suggested and get back when i test everything.

nmarche1 · 04-15-2024

I will double check the polling/agent mode setting just to make sure, in the meanwhile i should mention that for some reason we have two external connectors for FSSO agents on our two DCs and not one with a primary and secondary IP address (as shown ...

nmarche1 · 04-15-2024

Hello @AEK It has basically been causing problems since before i came to work here (I started in 2022 october), but i think in the last year the problems have become less rare.- We are using agent mode- The disconnection time could be either a minute...

nmarche1 · 05-10-2023

Maybe i am doing something wrong, I can get into my fortigate with SSH without problems but these commands are not working for me...Anything i should enable for it to work?

nmarche1 · 05-10-2023

I have tried both of these, unfortunately they do not work.No matter what value i put in the timeout time is at around 40 seconds but i do not have the 40 seconds in any parameter on my fortigate.

User Statistics

User Activity

Problem with FSSO removing users from auth

MFA Timeout settings for third party authenticator

I cannot see the automation category in the security fabric menu.

Re: Problem with FSSO removing users from auth

Re: Problem with FSSO removing users from auth

Re: Problem with FSSO removing users from auth

Re: MFA Timeout settings for third party authenticator

Re: MFA Timeout settings for third party authenticator

Re: I cannot see the automation category in the se...

User Statistics

User Activity

You are leaving our website