Hi All,There is a FortiGate 60E.I set up MFA the way shown on the
screenshot. The drawback of this method is that it requires FortiToken
Mobile.It means if I'm not available nobody can access the router.Is it
possible to set up MFA for admin access i...
Hi All,In the organization WIFI is controller by FortiNet WLAN
Controller (MC1550). It was noticed that devices connected to Wi-Fi send
traffic over WLAN controller and not directly via default gateway. Is it
normal for FortiNet wireless controller t...
Hi All,I created an IPSec VPN tunnel for remote Access "VPN for MAC" and
Client Address Range 172.30.1.1-172.30.1.254.Soon after that I deleted
it as all of a sudden it stopped working. Now I'm trying to re-create
IPSec VPN tunnel with the same name ...
Hi All,IPSec VPN is configured this way:HO: LAN [192.168.7.0/24] - WAN
--- IPSEC VPN --- WAN --- DMZ Zone [10.10.10.0/24]: BOOn both ends
FortiGate routers.VPN tunnel is up but traffic doesn't go
to\from.Checked firewall rules - ALL allowed to\from o...
Hi All, Can someone please help me with this.With all the pleasure I
would get rid of that FortiNet Controller and replace with something
else but it will take some time and for now I need to set up a static
route. No idea why that controller acts as...
Thanks guys for you replies. @ozkanaltas thanks heaps.Exactly what I was
after. The full command set was: config system adminedit adminset
two-factor emailset email-to address@company.comnextend
Hi @hbac Thanks for the link.It may be what I'm after.However, when I
try to add a static route the field for an interface name is empty. Is
it related to VLAN interface?If yes, could you please help with the VLAN
interface fields (IP address and Def...
Hi @hbac As I mentioned I added route manually route -p add 10.55.35.0
mask 255.255.255.0 192.168.9.5 on a desktop but traffic still goes
through wireless controller. 192.168.9.5 is a default
gateway.192.168.9.XXX is the IP address of the desktop. Yo...
