I know this is not a Fortigate issue, but I'm posting here in hopes that
someone has experienced the same problem. I already made a post about
this on the Technet forum over here:
https://social.technet.microsoft.com/Forums/Windowsserver/en-US/ad4a9f...
Hi!I have a network where WPA-Enterprise with RADIUS auth. is working
fine except for one office.Looking at the traffic, it seems that the
remote side thinks it is not reaching the RADIUS server with certain
packets. I have disabled local firewalls a...
Hi! According to my google searches, SPAN is supported on Fortigates
with HW switch. This document:
https://docs.fortinet.com/uploaded/files/3621/SWMTX-560-201704-R21.pdf
suggests that a FGT30D has a hardware switch and thereby should support
SPAN. S...
Hi! From ISP I have:Subnet 1 with IP .206/30.Subnet 2 with IP .216/30
Subnet .216/30 is routed to subnet .206/30 by ISP. Behind the FGT,
connected to DMZ, is a PBX with IP .218. DMZ is configured with IP
.217.PBX is configured has DMZ as GW. In FGT I...
A shaper can be applied to a firewall policy or used with application
control. Which of these are processed first in FortiOS?And if both are
applied, which of those takes precedence?
Hi, it's only NPS I'm afraid. It works fine with code and app
notification. The problem I have is when the user in Office/Azure is
configured for code from app or SMS. Then the group attribute is not
sent to the Fortigate and the authentication fails...
I'm trying to find an official statement on this too. Forticlient VPN
ver 6.2 seems to be requiring a license for MAC but not Windows, which
doesn't make sense. The older Forticlient 6.0 works on MAC without
license.
https://www.reddit.com/r/fortinet...
Hi!Yes, the (PBX) subnet consists of GW (FGT DMZ) .217 and PBX .218.That
shouldn't be a problem. Some screenshots of config:
https://imgur.com/a/jVz1O Edit: [strike]for troubleshooting purposes I
tried connecting a PC to DMZ with .218 as IP. PC was u...
