Re: Webpage not open "TCP reset from client"

avneesh_ · 10-20-2023

Description This article describes the case if the role of the interface is set to LAN or DMZ the system will create an address object related to the physical interface. There may be a need to remove that address object because the interface will not...

avneesh_ · 09-21-2023

Description This article describes that FortiGate can be configured to forward only VPN event logs to the Syslog server. Scope FortiGate. Solution Once the syslog server is configured on the FortiGate, it is possible to create an advanced filter to o...

avneesh_ · 08-17-2023

Description This article describes how to disable logging for a particular web filter category without changing the action for the category. This is particularly helpful if the category is generating a lot of logs that are not needed, but the categor...

avneesh_ · 07-14-2023

Description This article describes how to fix an issue where settings are not saved when trying to enable Fortiguard Spam Filtering options under an Email Filter profile. Note that the Email filter profile feature needs to be enabled from System -> F...

avneesh_ · 06-11-2023

Description This article describes that FortiGate will give an error when deleting any external connector from the Security Fabric even when it has no obvious references. The reference window shows no result (the external connector name is not used i...

avneesh_ · 09-11-2024

You can refer this article for setting a priorityhttps://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-determine-the-sequence-of-DNS-servers/ta-p/295579

avneesh_ · 08-12-2024

If you are using asterisk, you will need to set the type to wildcard

avneesh_ · 08-09-2024

If the website works without the webfilter, it is most likely getting blocked, as previously mentioned, try setting up a filter to exempt this website from being checked.

avneesh_ · 08-02-2024

You can download the config from the primary and search for fg-ipsec-101 to check for references. As recommended, if there are no references for the mismatch try rebooting the firewalls

avneesh_ · 07-26-2024

You can capture the IP addresses of these 4 users and create a firewall policy to allow traffic to this local website. Please ensure that this policy is placed above the policy that denies internet access to these 4 users.

User Statistics

User Activity

Technical Tip: Remove address object referenced by the interface

Technical Tip: Configure firewall to only forward VPN events to syslog server

Techincal Tip: Disable logging for a particular webfilter

Troubleshooting Tip: Settings are not saved when enabling Fortiguard Spam Filtering options under an Email Filter profile

Technical Tip: How to delete external connector from FortiGate Security Fabric

Re: How may one know which DNS servers a Fortigate is using?