Description This article describes that after upgrading FortiGate
VM-Azure to v7.4.8 security Fabric could not be established. Scope
FortiGate. Solution After upgrading FortiGate-VM Azure to v7.4.8
security fabric could not be established in the Secu...
Description This article describes how to configure SNMP to send a trap
from Vdom1 to the SNMP server using the root VDOM. Scope FortiGate.
Solution Configure the SNMP community. For example, FortiGate has two
VDOMs, Finance and IT, which are already...
Description This article describes how to configure an automation stitch
to receive email alerts for a failed HA peer member. Scope FortiGate,
all versions. Solution Create an automation stitch for email
notifications to get alerts when the HA peer m...
Description This article describes the configuration of SAML for the HA
management interface. Scope FortiGate. Solution Configure HA management
interface reservation in the HA settings: Primary firewall management
IP: '10.20.1.1'. Secondary firewall ...
Description This article describes how to troubleshoot FortiGate not
joining HA Cluster due to an HA password mismatch. Scope FortiGate, all
versions. Solution Run the following command to verify why FortiGate is
not joining the HA cluster. diagnose ...
Hello Stefan, To achieve the traffic prioritization scenario you
described with three VLANs (server, clients, other) using the full
bandwidth of your WAN interface while ensuring the server gets full
bandwidth priority when needed, you can follow the...
Hello @Mirza_Asad2723 , can you verify if the traffic is coming to the
firewall of first remote gateway with the help of sniffer. di sniffer
packet any "host x.x.x.x and host y.y.y.y.y and port sslvpn-port" 4 0 l
x.x.x.x ---remote gateway IP y.y.y.y ...
Hello @hannq, In this scenario, if the WAN connection is up and there is
an issue on the ISP side. WAN port status is up then Primary FGT will
still forward the traffic on the WAN interface to the next hop(ISP
router)If the WAN interface status is do...