Hey everyone,I have two fortiswitch 224D running 7.2.2 firmware that i
want to configure standalone.Switch 1 uses ports 23/24 for WAN and is
connected to switch 2 with fiber.My workstation is connected to switch 1
using mgmt port.I created the vlans ...
I tried the suggested solution but after that i wa not able to connect
to the switch at all and had to restore the former config file. Is there
any example configuration for this since i seem to have trouble
assigning the ip address to the right obje...
Thank you for your reply.I did make the suggested changes. But that did
not work. So i probably made a mistake.In the original setup i am able
to ping the second switch which is connected via a trunk.After i made
the changes, i am not able to connect...
I was able to fix it by configuring the gateway. Traffic is now going
correctly trough both switches.However, i am not able to connect to the
webbased dashboard on the ip address i configured for the VLAN. I can
only connect using the MGMT port. I di...
Sorry for the late reaction.I have made some changes as you suggested
and it is pretty much working. Only thing is that i still can not
connect to the management vlan from a different vlan.So what i want to
achieve is this:I do have a management VLAN...
