Description This article describes how to fix certificate error for
traffic being processed by a VIP and no inspection configured in the
firewall policy Scope FortiOS Solution There are cases when the
certificate error 'NET :: ERR_CERT_AUTHORITY_INVA...
Description This article describes resolving the ‘HTTP Success’ error
that occurs on a FortiGate device when registering a FortiGate HA
cluster’s logical serial number with FortiCare. Scope FortiOS. Solution
On a FortiGate HA cluster using a logical ...
Description This article describes an issue related to the hostname,
which is missing on the logs of the DHCP server, when users connect via
IPsec VPN using IKEv2 and SAML, and FortiGate is configured as a DHCP
relay. Scope FortiGate. Solution The de...
Description This article describes how to handle an issue where
source/destination country is shown as 'Reserved'. Scope FortiGate.
Solution Below is given a Forward Traffic log in order to understand
better the issue: date=2025-08-08 time=10:45:30 i...
Description This article describes how to monitor FortiGate using
ManageEngine OpManager, with an example. Scope FortiGate. Solution In
this example, ManageEngine OpManager is installed on a Windows client
which has the following IP assigned manually...
Hello, Please try to configure "cache-ttl" to 86400 seconds, if you have
not configured it already. Please find the command below: config
firewall address edit "trendmicro.com" set cache-ttl 86400 nextend
Please let me know if the issue will be fixed...
Hello, Please have a look at the document below, related with your
issue:https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-send-encrypted-logs-to-Syslog-server/ta-p/240995Best
regards,Ylli
Hello,Please follow below KB, if you need help to find the OID, to
monitor the EMS connection
status:https://community.fortinet.com/t5/FortiGate/Technical-Tip-The-correct-OID-to-monitor-each-interface-state/ta-p/198520
Best Regards,Ylli
Hello,Please be informed that you need to upgrade the FortiOS to 7.4.2,
in order to have the possibility to monitor the EMS connection status.
Best Regards,Ylli
