Re: Enabling preserve-session-route in SD-WAN Envi...

HarshChavda · 01-22-2025

Description This article describes how to troubleshoot the error 'An error occurred when attempting to change this reference (system.zone), this reference must be handled manually.' while trying to add an interface to the SD-WAN zone with the Integra...

HarshChavda · 01-19-2025

Description This article describes how to assign multiple FortiSwitch ports to the same VLAN in one go on FortiGate. Scope FortiGate, FortiSwitch. Solution In FortiGate GUI, Go to WiFi & Switch Controller -> FortiSwitch Ports. Select the first port a...

HarshChavda · 08-15-2024

Description This article describes how to enable a disclaimer page for users connecting to a specific SSID on a FortiGate SSID. Scope FortiGate. Solution A disclaimer page is a custom message or policy acknowledgment page that users must accept befor...

HarshChavda · 08-12-2024

Description This article provides a step-by-step guide on how to create a Firewall Policy using a VIP directly from the GUI. Scope FortiGate. Solution This guide shows an easy way to create a firewall policy using an existing VIP in the FortiGate GUI...

HarshChavda · 08-02-2024

Description This article provides a step-by-step guide on configuring an aggregate IPsec tunnel interface using the GUI on FortiGate. Scope FortiGate. Solution Configuring an aggregate IPsec tunnel involves combining multiple IPsec tunnels into a sin...

HarshChavda · 12-25-2024

Can you verify if Forticlient is compatible or try with newer version. Also try increasing idle timeout following this document: https://community.fortinet.com/t5/FortiGate/Technical-Tip-SSL-VPN-connection-logout-after-8-hours/ta-p/191322

HarshChavda · 12-19-2024

Hello @VANESSON_SANTOS, Could you let us know how long you are able to see the logs and what filter you are applying?

HarshChavda · 12-18-2024

Hello @nplljw , When both shared and per IP bandwidth configurations are applied traffic remains low priority unless explicitly overridden. High priority traffic will be forwarded first. The shared limit applies globally, while the per IP cap restric...

HarshChavda · 12-05-2024

Hello Can you confirm if the default web filter profile on the FortiGate and is synced with FortiManager. Also check if it's in the correct VDOM

HarshChavda · 11-22-2024

Hello @HyTronix , Yes, you can create an IP Pool on FortiGate 1 with the range 192.168.10.200-250 and apply it to the VPN policy that allows traffic from 192.168.20.0/24 to 192.168.10.0/24. When enabling NAT in the policy, select the created IP Pool.

User Statistics

User Activity

Troubleshooting Tip: 'An error occurred when attempting to change this reference (system.zone), this reference must be handled manually.' when trying to add interface to SD-WAN zone with Integrate Interface option on GUI

Technical Tip: How to assign multiple FortiSwitch ports to the same VLAN on FortiGate

Technical Tip: Configuring a disclaimer page on a FortiGate SSID

Technical Tip: Create a firewall policy using a Virtual IP (VIP) object

Technical Tip: How to create aggregate IPsec tunnel with GUI

Re: SSLVPN tunnel connection failed (Error=-20105) after SSL_get Error 5, WSAGetLastError 2746

Re: Fortigate and Fortianalyzer connection

Re: The problem of simultaneously calling shared files and per IP files in traffic shaping strategie

Re: Cannot apply default webfilter-profile to external Firewall policy, no error

Re: Site to Site IPSEC between to FortiGates - SNAT Question

Re: Enabling preserve-session-route in SD-WAN Envi...

Re: Change Internet FortiGate 200E

Re: Allow specific intra-SSID traffic

Re: memory conserve threshold values are hardcoded...

Re: memory conserve threshold values are hardcoded...

Re: memory conserve threshold values are hardcoded...

Re: Connecting via Forticlient VPN reverts all eth...

Re: forticlient vpn for mac

Re: scripts in FortiGate

Re: Configuration of Phase 2 Selectors on Site-to-...

KCS

User Statistics

User Activity

You are leaving our website