Hi, i been tasked to solve the problem in Forti 60F configuration. As i
never worked with VIP here, so maybe someone could point where is the
problem. Here is what must be done:Controller 1 and 2 has IP addresses:
172.22.22.194 and 172.22.22.195; GW ...
Had time to make configuration on FW. Basically removed secondary IP and
additionally change 1 VIP address, so interface in VIP IP would be
different. Had same problem. But it was from controller point, as it has
it's own FW there and only responds t...
For the switch. In the config of FW here in bold:edit "scalit_LAN"set
vdom "***"set ip 10.89.48.6 255.255.255.248set allowaccess ping https
ssh fabricset type hard-switchset alias "LAN" hardware switch is set. So
i suspect there is no additional swit...
Hi, from what i have. NAT :172.22.22.194 -> NAT ->
10.89.48.1172.22.22.195 -> NAT -> 10.89.48.2 And if I understand
correctly, controllers (endpoint device for electricity, send some type
of measurements to monitoring station) have 10.89.48.1 and 10....
