FG 60Ev 7.2.4 I need help with the traffic shaping policy triggering and
the traffic direction. When I created a VoIP traffic shaping policy
based on the traffic direction from the source to the destination, which
includes RTP and SIP services, I exp...
FortiWiFi 60Ev. 7.2.4 3CX PBXExternal SIP trunk RTP and SIP port
forwarding (VIP)RTP UDP 9000-10999SIP TCP/UDP 5060Traffic Shaping
Policy:When I checkdiagnose netlink interface list wan1I see that the
class ID 8 forwarded bytes change during the esta...
FortiSwitch 108EStandalone mode7.2.3 I have created ip-dscp-map with 4
queues (0-3) which follows Cisco 4-Class QoS Strategy Model. In
qos-policy (egress policy) I selected Weighted Round-Robin Scheduling.If
I understand it correctly, the queues in t...
FortiSwitch 108Ev. 7.2.3Standalone mode The following commands are
missing (at least these commands): diagnose switch physical-ports
qos-rates diagnose switch physical-ports qos-stats For the following
command: config switch acl ingress there are no ...
FortiSwitch 108EStandalone modev. 7.2.3I have created a LLDP-MED profile
"Phone-LLDP" with MED TLVs:VLAN 100DSCP 46for Voice and Voice
Signaling.And enabled LLDP on a physical port TX/RX with the
"Phone-LLDP" profile.Packet capture on both ends of th...
That is what I thought too when created a policy in one direction. I
expected the traffic flow was from the server to the client, but now I
see that the FortiGate always (in my case) starts the SIP session with
the packets flowing in the opposite dir...
Hi @gfleming, So, that means that the session determines in what traffic
direction the traffic shaping policy must be triggered, right?In my case
the SIP session opens with the client-to-sever SIP packet, I expected
that the session opens with the pa...
This is my final RTP_3CX (a custom service) configuration that worked
for me. config firewall service custom edit "RTP_3CX" set category
"VoIP, Messaging & Other Applications" set comment "Specific ports for
3CX PBX" set color 7 set udp-portrange 491...
Should I disregard FortiSwitch-7.2.3-Feature-Matrix.pdf and trust only
the admin guide?And what about CLI qos diagnostic? diagnose switch
physical-ports qos-stats list and diagnose switch physical-ports
qos-rates list are listed in that guide which d...
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.