I have topology with this details - Hub subnet 10.103.0.0/16 - Spoke1
subnet 10.100.0.0/16 - Spoke2 subnet 10.4.0.0/16 and 10.107.0.0/16 - Hub
and Spoke have 2 internet connection. - ADVPN and BGP was established
also with the shortcut tunnel - ADVPN...
My fortigate hub have BGP connection to the spoke, the spoke ip is
10.10.112.11 and BGP was established. But why i can't ping to that spoke
bgp peer ip? So traffic from the hub can't reach the spoke using this
tunnel interfaceIf i ping 10.10.112.1 fr...
i have tunnel to connect from branch to the datacenter but the traffic
seem goes to wrong path.In the BGP path i can see the next hops is right
where pointed to the tunnel ip, but in the routing table traffic to
datacenter forwarded to the internet g...
The BGP was established and routing to teh spoke from hub via
10.10.112.6 B 10.4.0.0/16 [200/0] via 10.10.112.6 (recursive is directly
connected, DC-SEG-BALI), 00:01:30, [1/0][200/0] via 10.103.113.6
(recursive is directly connected, DC-SEG-MPLS), 00...
Hi, The reason why we see only 40 second is I shutdown the tunnel
interface if i'm not troubleshoot this. Let this tunnel up will make
connection from hub subnet to the spoke subnet will be not established.
So i shutdown to let bgp send the traffic u...
Did you see ping replies from the tunnel when you pinged from the spoke
toward the hub? Yes Because ADVPN is supposed to need only one manual
IPsec configured between one hub and one spoke. Then ADVPN itself sets
up spokes to spokes automatically.Thi...
hub and spoke have 2 internet connection so there will be 4 tunnels.The
topology isspoke tun1 (internet 1) 10.10.111.6 <-------------------->
10.10.111.1 hub internet 1spoke tun2 (internet 2) 10.10.111.11
<--------------------> 10.10.111.1 hub intern...
