Fortinet Community

Shashwati · 12-01-2023

Description This article describes the case of FortiAnalyzer connectivity with FortiGate using SD-WAN. Scope FortiGate v6.X and v7.X. Solution Use the CLI and configure the FortiAnalyzer log settings. Use the 'interface-select-method' SD-WAN. Test th...

Shashwati · 11-24-2023

Description This article describes how to configure split tunnel for SSL VPN using address override Scope FortiGate 6.X and 7.X Solution Configure the SSL VPN user group. Configure SSL VPN Settings Configure the allowed subnet for the SSL VPN users. ...

Shashwati · 11-23-2023

Description This article explains how to configure an automation stitch to provide email alerts when IPSec tunnel dead peer detection fails. Scope FortiGate 6.X and 7.X. Solution Configure the Automation stitch under Security Fabric -> Automation -> ...

Shashwati · 11-11-2023

Description This article describes how to send a trap to the SNMP server for FortiAP and FortiSwitch when the controller status changes. Scope FortiGate 6.X and 7.X, FortiAP, FortiSwitch. Solution In the CLI: config system snmp community Set events f...

Shashwati · 10-04-2023

Description This article describes how to upgrade the Firmware version for a new device. Scope FortiGate v6.X and v7.X, Solution When manually upgrading Firmware from System-> Firmware this error appears: Step 1: Reboot the Firewall and press any key...

Fortinet Community

User Statistics

User Activity

Technical Tip: FortiAnalyzer connectivity with FortiGate using SD-WAN

Technical Tip: How to configure split tunnel for SSL VPN using an address override

Technical Tip: How to configure an automation stitch to provide email alerts when IPSec tunnel dead peer detection fails

Technical Tip: Send a trap to the SNMP server when FortiAP or FortiSwitch controller status changes

Technical Tip: Unable to upgrade Firmware version for a new device

Technical Tip: How to configure an automation stit...

Troubleshooting Tip: Unable to boot the firewall o...

KCS