Description This article describes a configuration save error
encountered when changing the order or status of NAC policies from the
GUI after upgrading to v7.4.8. Scope FortiGate v7.4.8, NAC policy.
Solution After upgrading to v7.4.8, when attemptin...
Description This article describes the error encountered where a DLP
Sensor is a mandatory field when attempting to create a DLP profile rule
of only file-type in the GUI. Scope FortiGate v7.4, v7.6. Solution When
navigating to Security Profiles -> D...
Description This article describes how to resolve FortiToken Cloud
License validation issues for FortiGates in HA due to cluster conflict
in the FortiToken Cloud Portal. Scope FortiGate, FortiToken Cloud.
Solution From the GUI -> System -> FortiGuard...
Description This article describes the behaviour (no results)
experienced when searching SD-WAN rules by the interface's alias. Scope
FortiGate v7.4, v7.6. Solution After upgrading, here is an example of a
few SD-WAN rules configured: When attempting...
Description This article describes how to allow a device such as a
Vulnerability Scanner for Intrusion Prevention while simultaneously
logging the signatures generated from the machine. Scope FortiGate.
Solution In some scenarios, Administrators want...
Hello @jmccoppin ,Utilizing the trusted host feature or local-in policy
is recommended for your request.Please see the following article which
explains the setup in further detail:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-System-admi...
Hello @Marcos_FDS1012 ,Thank you for confirming connectivity. Can you
test by changing the email server port? In addition, can you collect the
alert mail debugs as referenced in the first article?Kind Regards,
Hello @Marcos_FDS1012 ,If you are not receiving emails, please follow
the below document for the steps to follow when
troubleshooting:https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Email-alert/ta-p/199344For
the "From" field, can you...
Hello @aidnet , Please refer to the BGP section for troubleshooting
below:https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-FortiOS-routing-RIP-OSPF-BGP-static-routes/ta-p/198593Generally,
the first step is verifying packets over port 1...
Hello @DerekWSmall,Arp-timeout value is a value that can be set on the
Fortiswitch per the documentation. Can you please provide the link
stating this command is possible for the Fortigate?Kind Regards,
