Description This article indicates the settings to be made to avoid
flaps in the SFP+ interface manually negotiated at 10GB. Scope FortiGate
7.4.x. Solution SFP+ interfaces randomly turn down or turn up when
manually negotiated at 10 GB, as shown in ...
Description This article describes how some mobile internet providers
(4G/5G) use one IP address during the VPN authentication phase and then
switch to a different IP address after authentication, causing FortiGate
to terminate the connection. This b...
Description This article describes how to configure the 'speed test'
feature and the 'speed test schedule' feature to enable automated
measurements at scheduled times. Scope FortiGate v7.4.x and above.
Solution It is possible to schedule the speed te...
Description This article describes how to get information regarding logs
that exceed the threshold limit stipulated in the DoS policy
configurations. Scope FortiGate. Solution There are different types of
L3 and L4 DoS anomalies and threshold values ...
Description This article describes how to solve a problem related to the
SAP application where the 'TCP reset from client' message appears. Scope
FortiGate. Solution This issue is related to problems with the
difference between TCP MSS value. If pack...
