Re: FortiClient 7.4.1 (windows) cannot connect to ...

kaurm · 07-24-2025

Description This article describes how to resolve a scenario where the FortiSwitch 2048F is upgraded to 7.6.2, but the topology map is not working on the FortiGate. Scope FortiSwitch 2048F and FortiGate 900G. Solution In this scenario: The FortiSwitc...

kaurm · 04-27-2025

Description This article provides the commands to specify multiple RDNSS IPv6 IPs on the FortiGate. Scope FortiGate. Solution When trying to set up the multiple RDNSS IPv6 addresses, the commas, quotes should not be used as this will just pick one RD...

kaurm · 09-20-2024

Description This article describes how to use an automation stitch to run a CLI script and bounce the FortiGate interface during a fixed interval of time. An explanation is provided for how to bring down the interface and up during a scheduled time. ...

kaurm · 08-15-2024

Description This article describes how to resolve a scenario where the wireless clients are not able to authenticate to the wireless SSID while using the RADIUS-based security. Scope All FortiGate. Solution On the FortiGate, the EAPOL client start me...

kaurm · 04-02-2024

Description This article describes the CLI configuration steps to configure FortiExtender to operate as a WAN extension with a FortiGate. This article is most useful when the FortiGate GUI is inaccessible. Scope All supported versions of FortiGate. S...

kaurm · 12-15-2024

Hello k-saku,Please provide the following command output diag debug reset diag debug application sslvpn -1 diag debug enable Please check if TLS 1.1 and TLS 1.2 are enabled on the FortiGate, enable them in Internet Explorer as well.Thanks

kaurm · 11-29-2024

Hello Jon, What is the inspection mode used on the policy , please provide complete screenshot of the error. Thanks

kaurm · 11-27-2024

Hi van_sta, Please refer the following document for 2 gb models, https://community.fortinet.com/t5/FortiGate/Technical-Tip-FortiGate-is-entering-into-Conserve-Mode-during/ta-p/287053 Let us know if it helps Thanks

kaurm · 09-04-2024

Hello, which FortiClient version are you using Are you using windows 10 enterprise? Make sure the windows defender is disabled Could you please attach the screenshot with the error Thanks

kaurm · 08-30-2024

Hello, May I know firmware version you are using? When testing on my device, there is no error. Thanks

User Statistics

User Activity

Troubleshooting Tip: FortiSwitches not showing in topology view on FortiGate

Techinial Tip: Configure multiple rdnss IPv6 IPs on the FortiGate

Technical Tip: Automatically disable internet access after a certain time using an automation stitch

Troubleshooting Tip: FortiGate dropping EAPOL/RADIUS traffic

Technical Tip: Connecting FortiExtender with the FortiGate as the WAN extension in the CLI