Hello everyone, Looking for a solution to this after a week of searching
and trying. I wanted to setup a FG 100F v7.0.15 to be a vlan switch. I
removed all the ports from the switch except port1 as it will not allow
me to remove the last port of cour...
Wow yep cuz this is NOT a trunk. I gave up on FGNT a few years ago . I
tried to come back but no way. LOL not driving me crazy with bugs and
that never works. :)
Ok thank you that is what I thought because there is no way this was
this hard to do normally. I will just use subinterfaces then. definitely
disappointing Thank you Toshi.
You do not need a switch to test this. You need a device that can tag
vlans. If you have a NIC card on a PC or MAC is the same as a switch
doing it. As long as the NIC allows you to add a vlan-id. You can test
your work this way.
Hello Toshi, Thanks for the reply, I see that I didn't ask this
correctly, I am wondering why I cannot get the default switch VLAN 1 IP
address 192.168.100.111/24 on the trunk. That is what trunks do. I was
trying to avoid going through the long wind...
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites