Hi, I am trying to add an FTP session-helper for some passive FTP server
requirements. I understand that I need to add this, but would like to
get some input to be sure I' m doing this right. Firstly I have three
VDOMs, Global, root and Hosting. I wa...
Hi, The FG-100D units are in a A-P HA cluster on v4 MR3 Patch 6
firmware. I am trying to set the main DNS server in System -> Network ->
DNS -> Primary and Secondary DNS Server entries. The problem is that
these DNS Server IPs are pingable from the C...
Hi all, I need to be able to disable SSL Offloading for a Load Balanced
Virtual Server so that the SSL session terminates on each of the Real
Servers and not on the FGT units. There is no way in the Web manager to
disable this for HTTPS or SSL types,...
To add further, I am using a FG-60C device in the event there may be
capability differences. When I run " config system ?:" it displays a
list of available commands, and I see the following monitors System
Monitors configuration object-tag Object tag...
Yes, this was in my original post, the command below results in the
following error. So I cannot progress to the second show command.
ngfwngdc01 (Hosting) # config system session-helper command parse error
before ' session-helper' Command fail. Retur...
Thanks Bob, From the earlier post I entered #config vdom #edit Hosting
This provided the prompt below which I take to mean the focus is the
Hosting vdom. ngfwngdc01 (Hosting) # The errors seem to be related to
while in vdom edit mode. I may very well...
Thanks, OK I have done this and both the below command and also " show
system session-helper" fails to complete (see copy/paste below). Can you
steer me in the right direction to resolve and edit this? ngfwngdc01
(Hosting) # show system session-helpe...