I'm trying to access/monitor remote cluster nodes internally via VPN
using the 'set management-ip' command. FW-Node-1: config system
interface edit "vsw.LinkAgg0" set vdom "root" set management-ip
172.28.28.2 255.255.255.0 set ip 172.28.28.1 255.255....
Hello, I have a remote location deployed with an 81F active/passive
cluster (v6.4.5). Now i'm trying to get both nodes into my monitoring -
without luck so far. I have an VPN Tunnel to the cluster and according
to KB FD32214
(https://kb.fortinet.com/...
Hello, Smaller devices like the 30/40/50/60 models do not have a
dedicated mgmnt (oob) interface. How do i monitor the passive cluster
member as it does not have such a mgmnt interface? thx, screenie
5.6.8 seems a bit buggy, spend last few days with troubleshooting VPN
and BGP. Once configured IPSEC VPN for iOS devices on a 50E as example
it works well for nearly two days, but then it's not working anymore.
Phase1 negotiation fail's in any combin...
Sorry, but such a design cannot be intended - the monitoring system is
located on a central data center and deploying a dedicated monitoring
system for every remote location doesn't make sense at all. And
connecting the management port to a separate ...
I know what you mean, but that would require a separate internet
connection or an additional router inside the network just to make this
interface reachable. Don't hope Fortinet designed it that way as it
would be usless.
