Good afternoon!Recently started receiving an weird error while vpn
diagnosing on a 60C ver 4.3.12: ike 0:HERVAL: link is idle 5
192.168.1.10->0.0.0.0:4500 dpd=1 seqno=48c529 ike 0:HERVAL:22704: send
IKEv1 DPD probe, seqno 4769065 ike 0:HERVAL:22704: ...
Hello!After upgrading from 5.0.14 to 5.2.13 on a 60C the following route
is showing as default. And it hasn't been manually added.Static
0.0.0.0/0 0.0.0.0 wan2 There is also the default gateway acquired with
DHCP on the wan2 interface:Static 0.0.0.0/...
Hello!I have a question about policies and policy orders. We have CFTV
in all of our stores. What i have configured is a policy accepting
access during work time but with traffic shape and another policy to
accepting access any time and without restr...
Hello!Having problems to clear a specific IP from the DHCP pool, the
command 'execute dhcp lease-clear ip' gives me parse error before the ip
with return code -61. I don't want to remove every single lease, just
the one. Fortigate is a 310B V4 MR2.FI...
Hello!I'm having difficulties configuring HA on a FGT 40C on 4.0 MR3
firmware, every time a select Active-passive it reverts back to
standalone. Even on CLI "set mode" does not exist. Anyone knows why? How
can i configure HA if i can't change the mod...
Be warned, this will remove every single configuration under those
sections, so be sure to have a backup config file before continuing.
There is no other way thou. Later you will have to copy paste all
configs (related to that interface) directly in ...
