Hi, A customer of ours is running MPLS among the offices.Now a fortigate
had to be deployed there. Present setup is on cisco router terminating
MPLS.So on Site A connection from MPLS router say (192.168.1.1/24 on int
of Router) is coming towards Swit...
Hi, a customer of mine looking for power backup solution where in case
of power outage the servers and network equipment goes down by setting
up certain threshold. So we zero in on APC with snmp card where server
can be shut down gracefully.But what ...
Don' t know if this is the right place to post this question here or
not? Here one customer of mine is need to a UTM. So need to check the
apple to apple comparison on fortinet and sonicwall. Is there any
feature in fortinet which is not there in com...
Hi, I am planning tpo use a 1:1 lease circuit from ISP in following way.
ISP--->Fortigate(PAT/NAT)----->switch. The link should terminate on my
fortinet wan interface instead of any cisco router before that. Now my
isp has given me link on ethernet o...
Thanks for your response. What if both sites having FG and need to run
IPSEC with lower priority than MPLS. Which device need to send ping and
keep probing in case of failure of MPLS link. How to impliment S-2-S
IPSEC for redundacy.How will config lo...
To me it looks the routing problem for outgoing traffic. If we talk
about overlapping subnets then under static route the destination
network should be the Mapped external IP range (dummy range smthing
192.168.) instead using real address i.e 10 seri...
Emnoc will that not be a problem if it goes down unexpectedlly?It is 80C
and don' t have hdd. G3man..Can you suggest me a script.Say if battery
backup of UPS is about to exhaust then the FG shuts down automatically.
Reg, Sushil
Thanks a lot for all your pointers. My job is little tough here because
my customer provides services to Sonicwall.So he is in little dilemma.I
been able to convince their IT team on merit as far as fortigate is
concerned,now the next are top managem...
