Hi, I need to know if using email filter feature of fortigate does it
required to have utm profile on both directions? I have applied it from
Wan to Internal direction. Does it required other way as well? Regards,
Sushil
Hi, We are running 110C with us and data sheet of it says we can use 100
SSL clients. Our requirement is such where we wanted some of our partner
to access one of our server application sitting in our network.The count
initially is 70.And it will go ...
Hi, I have a linux server behind FG110C.Linux server is published for
public access on port 80.To access is for administration via SSH we
customized the port on 1082. Added the custom service with source and
destionation 1082 in all fields for low an...
Hi, Using Fg 80C at remote office. We were using S-2-2 tunnel b/w HO and
Remote office and works fine with us.In Ho added additional ISP link
being added.We needed to VPN to failover in first link goes down. All
configuration are made properly at HO ...
Hi, we are running 110C with MR2 patch 7. The FG is working in route
mode. There are few https websites (including webmails) we use from our
HO and RPC-over HTTPS from outlook client. Strangely for few users these
sites times out.Out of 125 users say...
Mine won' t be more than 50-60 users and purely http and https traffic.
I raised the ticket with FG TAC team and even they havn' t committed
anything on this and asked me to contact local sales and pre-sales team.
My main focus would be on web filter...
Default IPS signature will be enabled. Some basic category based url
filtering not more than that.FASE to be implimented. Traffic would be
purely on http/https only.Two site to site IPSEC tunnels. If 100c is
being sized between 20-40Mb/s(as per your ...
I needed to load balance two isp. One isp will be terminated on Wan1 and
the link speed from ISP1 is 4Mbps i.e 2 E1. 2nd isp will be on Wan2 and
link speed from ISP2 is also 4Mbps i.e 2 E1 again. as per Local
pre-sales team of Fortinet,110c can' t pr...
Thanks for your response. What if both sites having FG and need to run
IPSEC with lower priority than MPLS. Which device need to send ping and
keep probing in case of failure of MPLS link. How to impliment S-2-S
IPSEC for redundacy.How will config lo...
Follow this; 1. Create route based vpn for wan1.Add using cli the
monintor phase as well using wan2 for wan1 vpn.This will help in failing
over the vpn to redundant int i.e wan2. 2. Use regular policy on wan1 &
2 for the traffic.The distance Wan2 sho...
