Hi, I have a problem with SSLVPN, but only with tunnel mode. I don't now
why is not working. Below the settings: SSLVPN:config vpn ssl settings
set servercert "Fortinet_Factory" set idle-timeout 1800 set
tunnel-ip-pools "SSLVPN_ITP_DT" (address 10.24...
Hi,I have created the VPN IPSEC with my client. The destination address
is only available from the fortigate local address 172.19.192.1 (also in
the configuration VPN IPSEC tunnel). I need help how i can configure
policy from another LAN address exam...
i test tunnel mode using forticlient and browser. on picture i put only
ping without tunnel mode. Bellow i put again picture with tunnel
mode(browser), and you can see i cannot ping 8.8.8.8
Yes i have route static to the SSLVPN:S 10.240.240.0/24 [5/0] is
directly connected, ssl.root - > distance 5Bellow routing info: S*
0.0.0.0/0 [10/0] via 91.238.62.117, wan1 S 5.152.161.240/32 [5/0] via
91.238.62.61, wan2 C 10.3.0.0/24 is directly con...
Yes the portal ITP_DT has tunnel all portal. I check also without split
tunnel(all traffic via SSLVPN) and on portal page everythink is working.
Using tunnel mode nothing. Below seetings without split tunnel:###
PORTAL ITP_DTconfig vpn ssl web portal...