About Dante_De_Luca_FTNT

Dante_De_Luca_FTNT · 10-06-2016

DescriptionGuest users in FSSO are those who are unknown to the Windows AD or Novell network and servers that do not logon to a Windows AD domain. To enable guest access in an FSSO security policy, an identity-based policy assigned to the built-in us...

Dante_De_Luca_FTNT · 09-21-2016

Description This article explains how to run a report on traffic from a specific subnet. Scope FortiAnalyzer v5.4 v5.6 v6.0 v6.4 v7.0 v7.2. Solution This can be done through the filter settings on the report.FortiAnalyzer v5.4+. Go to Reports -> Edit...

Dante_De_Luca_FTNT · 08-29-2016

Description FortiLink uses the following protocols: HTTPS (TCP 443) for controlCAPWAP (UDP 5246-7) for legacy functions, SW upgrades etc. If HTTPS access or CAPWAP access is disabled on the downstream device, it may be unable to communicate with the ...

Dante_De_Luca_FTNT · 06-29-2016

Purpose When using a dialup IPsec VPN from the iOS VPN client, when using certificate authentication, the VPN may fail with the error "Could not validate the server certificate". Expectations, RequirementsWhen using certificate authentication for iOS...

Dante_De_Luca_FTNT · 04-29-2016

PurposeThis article discusses the case where two HA cluster members are listed on the FortiManager (or FortiAnalyzer) as separate devices.ScopeFortiGate, FortiManager running 5.2+Expectations, Requirements-ConfigurationThis can happen for a number of...

User Statistics

User Activity

Technical Note: Unauthenticated users are not identified as 'guest'

Technical Tip: Filtering a report by subnet or IP range

Technical Tip: FortiLink protocol requirements

Technical Tip: DialUp IPsec VPN from iOS fails with error "Could not validate the server certificate"

Technical Note: HA cluster members listed as separate devices in FortiManager / FortiAnalyzer

KCS