Hi,i'm installing two Fortgate F61 in HA and monitoring two interfaces.
They are working as expected and the monitored interfaces in standby
unit are up on the switches they are connectaed to. The thing is that
i'm interested in having these two inte...
Hi all.I have installed a Fortiswitch over layer 3 network, my
fortiswitch is already managed by a remote Fortgate. Fortiswitch is
connected directly with a 3rd party firewall in a branch site. Config
looks like this: config system globalset switch-m...
Hi bpozdena_FTNT. the "set link-failed-signal enable" moves the port
down for one second. The thing is that connected to FGs I hace two MCLAG
switches connected with an aggregate of 2 ports each switch to FGs. I
mean, port1 of switches to FG active a...
Hello, finally I made the installation and al the environment works with
only one Fortilink L3 connected to a 3rd party firewall with native vlan
4094. And all the rest of the vlans are routed on the firewall. Solved.
Hi gfleing, this is the only thing missing I need to test (I made the
configuration in a test environment), unfortunately I'm not the manager
of the firewalls and I have to ask Security team to configure the
firewall port. If it works I will reply wi...
Thanks for your reply emirjon and Graham. This is a Fortiswitch managed
by a remote Fortigate with a fortilink over a L3 network
(https://docs.fortinet.com/document/fortiswitch/7.0.4/devices-managed-by-fortios/801182/fortilink-mode-over-a-layer-3-net...
