We have a client with a FGT 100D that was updated from 5.2.7 to 5.4.1 to
support FortiSwitch management. It uses WAN2 for it's current outside
link. Since the upgrade, all report data except admin logins and changes
is empty. We used to get good data...
I've got a brand new FSW-248D-FPOE running 3.4.2. I can't make any
changes at all. Any change attempted (IP address, idle timeout, etc)
brings back the following error: Forbidden (403)CSRF verification
failed. Request aborted.More information is avai...
So I need to add FortiWeb to a FortiAnalyzer. I understand ADOMs will be
required. My question ... in turning on ADOMs, will I lose anything
that's already in there? Will be able to move various FortiGates to
other ADOMs once enabled without losing t...
I need to have a single Windows system running FortiClient with a web
filter very tight. I need it to be only able to visit a list of
specified URLs and everything else be blocked. I prefer that the
FortiClient not be registered to the FortiGate as I...
We have a client with a prod and a dev server. They need the ability to
have the FortiWeb switch between the two servers. Is there an easy way
to give them access just to change the IP in the server pool, or to mark
one system in maintenance and the ...
As I read the PSIRT Advisory, only a FortiAP used in mesh leaf mode...
and FortiWifi models being used in client mode (meaning the AP in the
FortiGate is a WiFi client of another AP... acting like a mesh leaf).
I've seen nothing on FortiWLC. Consider...
Matthijs wrote:Can you please also clarify this one: For FortiAP:Only
affect FortiAP which is working as a mesh leaf. A mesh network is where
you use multiple APs to extend the network ... so AP2 (and its clients)
are connected to the rest of the net...
itsupport@geddesfederal.com wrote:We are also waiting for this updated
firmware for a 221B! The vulnerability indicates it is a WPA2 general
vulnerability affecting the reuse of the nonce on one side of the
session key exchange so it should affect an...
As previously mentioned FortiAP 5.6.1 is no longer vulnerable to over
half of the Krack CVEs. Latest 5.4.x branch for FortiAP is 5.4.3
(release notes dated 21JUN17) and FortiAP-S and FortiAP-W2 5.4.4
(release notes dated 11JUL17). Neither mentions an...
