Hi,we have speed problem on vxlan over ipsec connection between FGT100F
and FGT60F. The tunnel works fine and the traffic is ok but the speed of
a simple test with iperf is about only 2MB/s. (both sites have 1Gb/s
symmetrical IPS connection). Any sug...
Hi Julien,yes i already have a ticket open but it is open from about 2
month and there isn't solution yet.Seems there is something that limit
the bandwidth on vpn because i tried with different providers and get
similar values. maybe it could be a sd...
Hi ,i'm back to this problem. I ran further tests excluding the vxlan so
now we have simple ipsec tunnel ( created with vpn sdwan wizard) but I
still get the same speed (slow). I've tried various MTU/MSS
configurations with no improve. Any suggestion...
Hi @aionescu , the flag of vpn tunnel on each firewall is "npu_flag=03"
and the MTU is "SA: ref=6 options=10226 type=00 soft=0 mtu=1438".The cpu
of each firewall when i run some tests with iperf stays around 1-2% on
each side. Stefano
I tried with "diag traffictest" to PC on hardware interface but I get
the same low result.and as you have seen "diag traffictest" to the same
pc on software switch is capable of getting the desired results via
windows size. ( vxlan is encapsulated on...
