Description This article describes the issue faced when FortiGate has
the LENC (low encryption license) and trying to update the FortiGuard
database and license with FortiManager as an FDS server. Scope FortiOS.
Solution When the FortiGuard default s...
Description This article describes how to apply a traffic shaper to SSL
VPN traffic after connecting to FortiClient. Scope FortiGate, FortiOS,
FortiClient. Solution Configure SSL VPN settings under VPN -> SSL VPN
Settings. Create the portal configura...
Description This article describes the issue reported after adding the
Wwan link to the SD-WAN Zone, as the default route did not get pushed in
the routing table. Scope FortiGate Solution When a user has multiple
links and is deploying the SD-WAN in ...
Description This article describes when the FortiGate is not accessible
from GUI and in the putty access, it shows high CPU Utilization. Scope
FortiGate. Solution When the firewall is accessible from the SSH via
putty but not through the GUI, a check...
Description This article describes how to update the license offline
when there is no internet access to the FortiGate. Scope FortiOs 7.2.0
and above. Solution When the firewall is operated in the Transparent
mode in the network and only used for Int...
Hi @ck888 Request you to kindly check the below document and it helps
you to block the images.
https://community.fortinet.com/t5/FortiProxy/Troubleshooting-Tip-How-to-block-images-using-Content-Analysis/ta-p/196170+
Refer the below CLI commands Cachi...
Hi @minibo Thanks for your post in the forum. + As per the update I can
see that you are connecting with the SSL VPN web-mode.+ The web page is
coming but not with all complete details.+ How are you relating the
proxy with this ?+ The implementation ...
Hi @ck8882 Thanks for posting your query. Can I know where are you
seeing these options in AD ? Kindly refer the below document for setting
the LDAP server in Fortigate
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-configure-FortiG...
Hi @JimBo Thanks for posting the update The ipsec tunnel can be
terminated to the loopback interface, but only the reachability to the
loopback IPs should be there. Can you just tell how the connectivity is
between both the loopback IPs.Take the belo...
Hi @Emma02 Can you confirm if the both ends is FGT or its between FGT to
other device.Which the ike version you are using is it ike v1 (main or
aggressive) or ike v2 Also share the ike debugs:dia vpn ike log-filter
dst-addr4 x.x.x.x >>> x.x.x.x is th...