For a client, in his local FortiAnalyzerVM (v7.4.1), I added the local
Fortigate200F (v7.2.4), and it work great. So I tryed to add, with the
same "Device Manager-Add Device" a FortigateVM (v7.2.4) in AWS with the
serial number, but even if the wizar...
Or... it feels like they are always at 100% full blast and that makes
noices ... At that price point, I am flabergasted that we can't control
these... or I have missed an option somewhere? Firmware 7.2.3, but I
remember it was at 100% also with the 6...
For a client, I am trying to setup a vpn site-to-site from a local
Fortigate 200F, firmware 7.2.3, to the AWS site-to-site connectors. I
succeded to make it so I could ping from AWS to a local machine, but
ping from a local machine to a AWS machine w...
FortiGate200F , firmware version 7.0.8, I need some hint. 1- So I
configure an LDAP server on my Fortinet, used the "test" button with a
username and password and it's working. (Edit LDAP Server image : That
"test user credentials" button is working....
Thanks for the answer and guidance. I'll So, at first I tryed the basic
with the sniffer... FortiAnalyzerVM 192.168.1.50 : sniff anything from
FortigateVM, ping, and confirm it work.FortigateVM 10.0.1.50 : exec
ping-options source 10.0.1.50, sniff an...
I went to the top, and asked for an official request. Nicolas G from
Fortinet wrote me: "Thanks for reaching out regarding this NFR request.
Regarding the suggestion of giving the end user the capacity to change
the fan controls, this, however, canno...
@abarushka wrote: I made a lab test (FortiGate 200F) and I noticed that
fan speed is adjusted dynamically (4 FAN 2 SYS FAN). Unit was almost
idle....I couldn't find the way to manually control speed fan though.
Thanks for the test on your side. Can y...
Thanks. I'll probably go the Forti-VM to Fortigate way. I have a similar
setup right now with my current Peplink router. And of course, when you
connect vendor1 to vendor1 routers, problems go away ;)
