Thank you for accepting my request. I'm setting up vpn on FortiWiFi 90D
and trying to create a static route. For some weird reason, it won't
populate in the routing table. If i try to add a static route to an old
existing tunnel setup on the device, ...
Hi, This is what i see from the command. It shows up but i see a lot
errors. 'vpn-4f35252e-0' 52.202.144.5:4500 selectors(total,up): 1/1
rx(pkt,err): 0/0 tx(pkt,err): 0/120465'vpn-4f35252e-1'
54.172.182.145:4500 selectors(total,up): 1/1 rx(pkt,err): ...
it's showing inactive using the CLI. C *> 169.254.45.209/32 is directly
connected, vpn-4f35252e-1C *> 169.254.45.210/32 is directly connected,
vpn-4f35252e-1C *> 169.254.47.157/32 is directly connected,
vpn-4f35252e-0C *> 169.254.47.158/32 is directl...
Yes, the tunnel is up. The only difference between both firewalls that
the one i'm using issues with setup with broadband service using PPPOE
and the other firewall that worked is using fixed IP.
