Hi,This is my first experience working with VLAN config. on Fortigate
Firewall. I am using FGR-60F (FortiOS 6.4.6) Firewall and unable to get
it working with VLANs. I have attached high level network architecture
where are creating VLANs based on pro...
Hi. We have two sites using the same subnets (192.168.0.0/24 ->
restriction due to systems having built-in mechanism and are not freely
configurable) and I followed the cookbook to configure the Site-to-Site
VPN on Fortigate Firewall. The VPN Phase1 ...
I got a chance to access the firewalls. On Branch site, I could connect
PC and sent the ping command, on HQ site, there was a device which could
only reply but could not initiate ping.I was able to also capture
packets on source port of Branch site b...
Noted :)I am currently far away from network and firewalls. Will share
the diagnostics once I get access.Please find below the
configuration.Branch Firewall:edit "PLC_Connect address" set uuid
4d67ca4a-4a2a-51ed-1427-03d7d6cb4e94 set type interface-s...
Hi Aleksandar, Yes. I followed the above mentioned KB. I have done only
ping test. The VPN is UP on both Phases but my local device LAN
connection is unreachable to firewall WAN port by "ping" also. Can it be
because of restriction from IPV4 rules (I...
