please find below network diagram to understand the issue.we have three
different subnet which are directly connected trough unmanageable D-link
switches.rules are made on the firewall itself for connecting to
different subnet.My issue iswhen i tried...
we have default policy for the users and it's proxy based. when policy
is applied trough GUI it will not display any error nor it will applied
to that rule. so could you help me how to troubleshoot the issue so that
i can proceed further.
Thanks, a lot to all as per the fortinet TAC I need to upgrade the
firmware to the latest one. but i have one fear in my mind as the latest
firmware is (i.e 5.2.3 or 5.2.2) not having "top client by bandwidth"
widgets in the setting as i wanted to kn...
Thanks, a lot to all as per the fortinet TAC I need to upgrade the
firmware to the latest one. but i have one fear in my mind as the latest
firmware is (i.e 5.2.3 or 5.2.2) not having "top client by bandwidth"
widgets in the setting as i wanted to kn...
Thanks, a lot to all as per the fortinet TAC I need to upgrade the
firmware to the latest one.but i have one fear in my mind as the latest
firmware is (i.e 5.2.3 or 5.2.2) not having "top client by bandwidth"
widgets in the setting as i wanted to kno...
if i want to disable the ips traffic for intra-lan traffic then i need
to run these command under the CLI. set utm-status disableset ips
disable. is it right?and doing so does it impact the any other policy
(e.g. lan to wan policy)?also if i have any...
Hi please find the output for the from command line for the
intra-traffic rule.please let me know if we can disable the ips for the
intra-lan traffic or not and how to do that.does it will have any impact
or firewall performance?
