Hi,I have an ipsec tunnel to a meraki MX and users behind the MX are
complaining sometime that they cannot reach the resources back behind
the fortigate. We solve this immediately by doing a ping from one of the
servers behind the fortigate to the lo...
Hello, I am having issues in getting this dual-ISP set up to work with
vdoms.There are currently two vdoms in the virtual fortigate root &
vdom-1.Each vdom has a seperate ISP with different IP-ranges.Traffic
through ISP1 is directly NAT:ed through VI...
Hi,We have a fortigate 100D and under the SSL-VPN monitor we are seeing
lots of users with lots of IP adresses under the active connection.I
have tried to upgrade the fw from 6.2.3 to 6.2.5 but it is still
behaving the same. Is this a normal behaviou...
Hi,I have configured a Fortimanager and we have bought licenses for it
(100UG) and then I have added just one fortigate to test it before I do
it on a production environment. I get a message when I try to upgrade it
which tells me that this: "Current...
Hi,We have a lot of fortigates and we want to upgrade these but doing it
manually requires a lot of time and we are looking at deploying a
fortimanager to do the upgrade automatically. I have a question though
about this. If we add the fortigates on ...
Hi Bill,Behind the fortigate there are different vlan and the users
behind the Z3C need to access only one of these vlan through the MX
which will ve connected to the fortigate. Can I configure the link
between the MX and fortigate as access link, si...
Hi Andreas,I see now so the source IP can be whatever IP that I already
have behind the fortigate and this source IP should be matched to the
one we configure on the syslog server. I just need to clarify something
else, so through the firewall the on...
Hi Shane, We are still not able to sent the logs to the kiwi syslog
server:This is how our setting on fortigate looks like:config log
syslogd settingset status enableset server "192.168.121.5"set mode
udpset port 514set facility local7set source-ip '...
