Technical Tip: Add a Huawei Switch (over SNMPv3) a...

Jean-Philippe_P · 08-11-2023

Description This article describes how to have an automatic FortiClient VPN connection on the PC startup. Scope FortiClient EMS v7.2.1 and FortiClient v7.0.9 and v7.2.1. Solution When using Forticlient EMS some can have problems starting the FortiCli...

Jean-Philippe_P · 08-01-2023

Description This article describes how to add a Huawei Switch (over SNMPv3) and SSH to the FortiNAC. Scope Huawei S5735-L8P4S-QA1 V200R022C00SPC500. FortiNAC v9.4.3.0752. Solution Huawei Switch SNMP Configuration. Log in to the switch. Add the follow...

Jean-Philippe_P · 07-25-2023

Description This article describes how to configure to bridge multiple internal networks wirelessly. Scope FortiAP managed by FortiGate. Solution When SSID is configured in bridge mode. It allows devices to connect seamlessly to the network using eit...

Jean-Philippe_P · 04-26-2023

Description This article describes how to set up Ipsec VPN between two FortiGates using VPN Setup wizard and custom profile. Scope FortiGate VM. Solution FortiGateVM to FortiGateVM – with the default profile. This is going to be a brief introduction ...

Jean-Philippe_P · 12-22-2022

Description This article describes why FortiAP - UF series devices cannot be recognized by FortiGate. Scope Any supported version of FortiGate. Solution Change-out-of-box-FAP-U-boot-image FAP-UXXXF (2022): https://www.fortinet.com/content/dam/fortine...

Jean-Philippe_P · 09-17-2025

Hello Pdev,   Thanks for sharing this to everybody!

Jean-Philippe_P · 09-17-2025

Hello, We are still looking for an answer to your question. We will come back to you ASAP.

Jean-Philippe_P · 09-17-2025

Hello rakeshlad, I found this solution. Can you tell us if it helps, please? To add custom ringtones on FortiVoice using FortiFone 380B and 280B, you can follow these steps to customize sound files: Access Custom Sounds: Navigate to `Custom Sounds > ...

Jean-Philippe_P · 09-17-2025

Hello kylehouk, I found this solution. Can you tell me if it helped, please? To manage FortiSwitches using FortiLAN Cloud, you can manage up to 3 switches for free under the Freemium model. However, if you need to manage more than 3 switches, a valid...

Jean-Philippe_P · 09-17-2025

Hello Nour_Alkonsol, I found a solution. Can you tell us if it helps, please? To address the error message "failed to add per-device mapping to fmg variable," you can try the following steps: Check ADOM Integrity: Use the command `diagnose cdb check ...

User Statistics

User Activity

Technical Tip: Automatic FortiClient VPN connection on the PC startup